Beaded Wire Thermocouple

BJWE offers 24 hour delivery (or better) on most beaded wire thermocouples. These thermocouples consist of a piece of insulated thermocouple grade wire, cut to length, with a thermocouple weld on one end (hot or sensing end), and stripped leads on the cold end. Wolfe Enterprises uses a special Tungsten Inert Gas Welder in an argon atmosphere for the weld. Beaded wire thermocouples are excellent low cost solutions to measure air and surface temperatures. Water resistant Teflon caps, connectors, and stainless steel over-braiding are available.

     ORDERING CODE  T20-TP-24,   K36-GG-15FT-MCM

     Sample Part Number 1: (1&2) T24-(3) TP-(4) 24

     Sample Part Number 2: (1&2) K36-(3) GG-(4) 15FT-(5)MCM

(1) Thermocouple Type		(4) Length
Enter	Description	From 1  to 240  Specify in Inches
J	Iron/constantan	(See Example 1)
K	Chromel®/Alumel®
T	Cooper/Constantan	For probes over 240  (20 FT), Specify in Feet and Include the Letters FT in the Number
E	Chromel®/Constantan	(See Example 2)
(2) Wire Gauge		(5) Options
Enter	Description	Enter	Description
20	20 AWG (.032)	None	Leave Blank
24	24 AWG (.020)	SB	Stainless Steel Over- braiding on T/C Wire
26	26 AWG (.015)	STR	Stranded Thermocouple  Wire for Flexibility
28	28 AWG (.013)	CAP	Teflon Cap Over Junction for Moisture Resistance
30	30 AWG (.010)	SPL	Special Limits of Error
36	36 AWG (.005)	SL	Compensated Spade Lugs on Lead Termination
40	40 AWG (.003)	MC*	Mini Connector on Lead Termination
		SC*	Standard Connector on Lead Termination
(3) Wire Insulation
Enter	Description		*Specify:
TF	Extruded FEP Teflon®		M     (Male)
TFE	Fused Teflon® Tape		F     (Female)
TP	Extruded PFA Teflon®		MF  (Both)
KT	Fused Kapton® Tape
GG	Double Fiber Glass
CB	Ceramic Fiber
HTG	High-Temp Fiberglass
ICB	Ceramic Fiber w/Inconel Over-braiding

Wire Information

ABV	Insulation	Continuous Temperature	Gages Wire is Available
			J	K	T	E
PV	Extruded PVC Ripcord	+221°F (max)	24	24	24	None
TF	Extruded FEP Teflon®	+400°F (max)	20	20	20	None
TFE	Fused TFE Teflon® Tape	+500°F (max)	20, 24	20, 24	20, 24	None
TP	Extruded PFA Teflon®	+500°F (max)	20, 24, 26, 30, 36	20, 24, 26, 30, 36	20, 24, 26, 30, 36	20, 24, 26, 30, 36
KT	Fused Kapton® Tape	+600°F (max)	20, 24, 30	20, 24, 30	20, 24, 30	None
GG	Fiberglass Insulation	+900°F (max)	20, 24, 28, 30, 36	20, 24, 28,30, 36	20, 24, 28, 30, 36	20, 24, 30, 36
HTG	High-Temp Fiberglass	+1300°F (max)	None	20	None	None
CB	Ceramic Fiber	+2200°F (max)	None	20	None	None
ICB	Ceramic Fiber w/Inconel OB	+2200°F (max)	None	20	None	None

      Thermocouple Selection Guide |  PDF Data Sheet

Specifications subject to change without notification. Chromel® and Alumel® trademarks Hoskins Manufacturing Company.  Teflon® and  Kapton® trademarks DuPont.