Validation/Autoclave Beaded Wire Thermocouple

These new beaded wire thermocouples feature the new HTE/D-24-TT wire. This Teflon® extruded thermocouple wire reduces, and/or totally eliminates vacuum and moisture leakage during autoclave (validation) use.

Typical extruded Teflon® Thermocouple wire often leaks moisture in the space created between the individual conductor insulation and the outer Teflon® jacket (see drawing A). BJWE offers Teflon® tips or dams to eliminate leakage on these validation probes. The new wires consist of a single extrusion that reduces both the size and cost, along with virtually eliminating all vacuum leakage (see drawing B).

The insulation is PFA Teflon® (+260°C/+500°F) with a solid blue jacket. As usual the validation thermocouples will be type "T" (Copper-Constantan) , special limits of error. The new TT24-TA is 24 AWG solid conductor

We offer 24-48 hour delivery on most orders under 100 pieces.

ORDERING CODE:
Example Part Number:
TT24-TA-48FT

(1)TT24-TA-(2)36FT-(3)XX

(1)Model Number         TT24-TA 
(2)Length of Wire         Enter in Feet
(3)Connectors               Connectors Available, Please Consult for Part Number
Specifications subject to change without notification.  

Thermocouple Selection Guide   | PDF Data Sheet      

Teflon™ and  Kapton® trademarks DuPont.

ANY STATEMENT AS TO PRODUCT COMPLIANCE WITH APPLICABLE LAW (INCLUDING WITHOUT LIMITATION, THAT PRODUCTS ARE Pb-FREE OR RoHS COMPLIANT) IS AS PROVIDED BY ITS SUPPLIERS, AND B. J. WOLFE ENTERPRISES DOES NOT WARRANT ITS ACCURACY AND WILL NOT BE LIABLE FOR ANY ERROR WITH REGARD TO SUCH INFORMATION.  CUSTOMER USES THE INFORMATION AT ITS OWN RISK.  PRICES SUBJECT TO CHANGE WITH NOTIFICATION.

If you require additional information contact us:   

(800) 554-1224, (818) 889-8412, Fax (818) 889-8417 or email:  info@bjwe.com

Home   |  About Us  |  Disclaimer  |  Privacy Policy