CB150D Dual & CB225T Triple Series

.50 Inch Profile

Synchronization Input

Output Voltage Trim Pin

Remote Turn-On / Output Status (TTL)

Output Over-Voltage Protection

Output Over-Current Protection

Over-Temperature Protection

M Version-100% Environmental Screening

Fixed Frequency (500kHz) Conversion

High Temperature Burn-In

Environmental - Unscreened (I) or Screened (M)

Options Available:

• EMI Filter
• "B" Pins Out of Bottom of Unit
• "C" Pins Out Top of Unit
• "D" Through Hole Inserts (.115DIA)
• "I" M2.5 Inserts (STD 4-40 Inserts)

Selection Guide
CB150D Data Sheet & CB225T Data Sheet
Specification subject to change without notification.
Environmental Screening
	M-Grade Environmental Screening
	Stabilization Bake	+125°C for 24 hours Similar to MIL-STD 883, M1008.2, Condition B
	Temperature Cycling	10 Cycles -55°C to +125°C, (Transition Period 5°C/min.), Similar to MIL-STD-883, M1010, Condition B
	Burn-In	160 Hours @ +85°C min. with Vin=28Vdc & Output Full Load
	Final Testing
	I-Grade Environmental Screening
	Burn-In	16 Hours @ +85°C min., with Vin=28Vdc and Output at Full Load
	Final Testing

	Dual and Triples Output Voltage & Output Current
	Nominal Output Voltage	Output Current (Amps)	Configure Part Number
	2	15.0	Part numbers for the CB150D (dual) & CB225T (triple) are configured
	3.3	15.0
	5	15.0
	5.2	14.5
	12	6.3
	15	5.0
	24	3.2
	28	2.7
Sample Configuration:  CB150DM/5/15-C-D, CB225TM/5/15/24-C-D